Mesin Cutting Sticker Graphtec FC8600

Mesin Cutting Sticker Graphtec FC8600 merupakan versi modifikasi dari Seri pendahulunya yaitu FC8000. Perbedaan paling signifikan adalah penggunakan antarmuka / interface Jaringan LAN sebagai tambahan standar Port Serial RS232 sebagai standar.

Mesin Cutting Sticker Graphtec FC8600 tersedia dengan beragam ukuran lebar area pemotongan untuk menyesuaikan kebutuh bisnis cutting sticker anda.

Spesifikasi Lengkap Mesin Cutting Sticker Graphtec FC8600

Model FC8600-60 FC8600-75 FC8600-100 FC8600-130 FC8600-160
CPU 32-bit CPU
Konfigurasi Grit rolling type
Drive method Digital servo drive
Area Potong Maks. (W x L) (*1) 610 mm x 50 m 762 mm x 50 m 1067 mm x 50 m 1372 mm x 50 m 1626 mm x 50 m

Garansi Akurasi Area Potong (*2)

590 mm x 15 m 742 mm x 15 m 1043 mm x 10 m, 894 mm x 15 m 1342 mm x 10 m, 894 mm x 15 m 1603 mm x 10 m, 894 mm x 15 m
Lebar Media yang dapat dipasang Min. 50 mm Min. 50 mm Min. 50 mm Min. 50 mm Min. 50 mm
Max. 770 mm Max. 920 mm Max. 1224 mm Max. 1529 mm Max. 1850 mm
Lebar Potong Pintas Maks 734 mm 886 mm 1191 mm 1496 mm 1750 mm
Jumlah Push Roller 2 rollers 2 rollers 3 rollers 3 rollers 4 rollers
Kecepatan Potong Maks 1485 mm/s at 45° direction
Akselerasi Aksial Max. 39.2 m/s2 (4 G) in 8 steps
Tekanan Potong Max. 5.88 N (600 gf) in 48 steps
Resolusi Mekanik 0.005 mm
Resolusi Terprogram GP-GL: 0.1 / 0.05 / 0.025 / 0.01 mm, HP-GL™: 0.025 mm
Akurasi Jarak (*2) Max. 0.1 mm or 0.1 % of plotted length
Pengulangan (*2) Max. 0.1 mm in plot up to 2 m (excluding the expansion and contraction of the media)
Ukuran Karakter Minimum Approx. 3 mm alphanumeric (varies depending on character font and media)

Jumah Alat Yang dapat Dipasang

1 tool (cutting blade, plotting pen or pouncing tool) in standard;
2 tools (cutting blade and plotting pen) when second penholder (optional) is installed
Tipe Pisau Supersteel (0.9 mm or 1.5 mm diameter)
Tipe Pena Water-based fiber-tip pen, Oil-based ballpoint pen
Tipe Alat Pouncing Steel pin 1.2 mm diameter, required optional pouncing tool (PPA 33-TP12)
Tipe Media (*3) Self-adhesive marking film (vinyl, fluorescent, reflective, high-intensity reflective film) up to 0.25 mm thick,
Sandblast resist rubber up to 1 mm thick
Kertas Kompatibel Untuk Pouncing Regular paper from 0.06 to 0.13 mm thick
Lampu Penunjuk Built into the tool carriage
Pisau Potong Pintas Built into the tool carriage
Pemotongan Perforasi Supported (performed by force control)
Registration mark sensing system Scans the mark by optical sensor (ARMS5.0), Segment area and Multiple-mark compensation, 4-points axis alignment, Auto mark detect
Antarmuka Standar USB2.0 (Full speed), RS-232C, and Ethernet (10BASE-T/100BASE-TX)
Memori Cadangan 2 MB
Set Perintah GP-GL / HP-GL™ emulation (Set by menu or command, and selects from GP-GL, HP-GL™, or Auto select)

Pengaturan Kondisi

Dual configuration (save two (2) user settings with eight (8) separate condition setting for each user)
Layar Graphic type LCD (3-inch, backlight)
Sumber Daya 100 V to 240 V AC, 50 / 60 Hz
Komsumsi Daya Max. 160 VA
Operating environment 10 to 35 °C, 35 to 75 % R.H. (non-condensing)
Garansi Akurasi 16 to 32 °C, 35 to 70 % R.H. (non-condensing)
Dimensi (W x D x H) Approx. 1128 x 715 x 1219 mm Approx. 1278 x 715 x 1219 mm Approx. 1578 x 715 x 1219 mm Approx. 1878 x 715 x 1219 mm Approx. 2138 x 715 x 1219 mm
Bobot Approx. 38 kg Approx. 42 kg Approx. 46 kg Approx. 50 kg Approx. 59 kg
including stand including stand including stand including stand including stand
Program Bawaan (*4) Windows driver, Plotter controller, Graphtec Studio, and Cutting Master 3
OS Kompatibel (*4) Windows 8 (8 / Pro / Enterprise)
Windows 7 (Ultimate / Enterprise / Professional / Home Premium)
Windows Vista (Ultimate / Enterprise / Business / Home Premium / Home Basic)
Windows XP (Professional / Home Edition)
Macintosh OS 10.5.8 to 10.8
Standar Kompatibel UL60950-1, cUL, CE mark (Low voltage and EMC), KC mark (Low voltage and EMC)
FCC-A, EN55022-A
*1 Saat Pegangan Pena kedua dipasang, area potong maksimum berubah. (FC8600-60: 601 mm, FC8600-75: 753 mm, FC8600-100: 1053 mm, FC8600-130: 1352 mm, FC8600-160: 1613 mm)
*2 Dioperasikan dengan kondisi potong tertentu dari Graphtec. Pada Pemotongan panjang, keranjang digunakan.
*3 Jika beberapa jenis rekfektif film instensitas tinggi digunakan, direkomendasikan untuk penggunaan pisau CB15UA/CB15UA-K30 dan penguatan alas belakang media (backing sheet).
*4 Untuk informasi OS Kompitibel or Program Aplikasi, silahkan cek website atau hubungi representatif lokal Graphtec